ENERPAC/PORTO-POWER ATTACHMENTS
One of the really great aspects of the BLACKHAWK PORTO-POWER System
and the related ENERPAC Equipment is the ability to add optional
extensions, saddles, collars and bases to the tools and adjust them
to suit your specific project.
Please note: These Attachments are rated at HALF
of their old capacity, (probably due to OSHA sticking their noses in and
an ugly little fact of life know as LIABILITY INSURANCE).
So, it works like this - If you have a 10 ton ram you get the attachments rated
at 5 tons, okay? (Even tho they are the exact same items that used to
be rated 10 tons a few years ago). Then, you buy a Gauge and only pump
til the pressure reads 5,000 PSI - Any questions?
Here are a few examples of what can be done...
Standard Extension Setup
 |
Extensions Detail
 |
Toe Pulling Setup
 |
Clamping Setup
 |
Chain Pull Setup
 |
Double Chain Pull Setup
 |
The three different types of Attachments are detailed here...
Items that add onto the top of the Ram Piston are Saddle Attachments.
Items that screw onto the top Collar of the Cylinders are Collar Attachments.
And items that connect to the bottom of the Cylinder are
Base Attachments.
For more in depth specifications click here
PORTO-POWER PAGE
PORTO-POWER SPECS & PRICES PAGE
ENERPAC PAGE
This page updated by Richard J. Tafilaw, September 1, 2010. Online since March 30, 1996
Consumer Phone Hours: 9:00 AM til 2:00 PM, Pacific Time, Monday - Friday,
.
OTTO SERVICE CO., 2014 Burbank Blvd., Burbank, California 91506
United States of America
©2010 OTTO SERVICE
