AnimatedJack OTTO SERVICE
HOME EMAIL CONTENTS Phone & Fax

HOUSE LIFTING

Oddly enough, the Big Three Industrial Hydraulic Component Manufacturers don't actually make or offer lifting systems, per se. They leave it up to the individual distributors and/or end users to do the job.
(By the way for a valve setup like what is pictured below YOU have to assemble the items yourself - Screw the valves into the manifold, attach the Couplings, add on the Gauge and bolt it all onto a piece of sheet metal on or near your pump!)

What we have done here is to simply put the typical individual system components together in a visual representation and then list what a few popular configurations would add up to so you'll have a fair idea of how many nickels you'll have to put aside before you can have the system of your dreams.

Please Note - An important variable in the mix is the tonnage of the Ram Cylinders and their Strokes. For instance a 15 ton 4 inch stroke Ram sells for about $386 whereas a 15 ton 12 inch stroke Ram goes for almost more than double that - About $722.

It is highly advised that you study your application carefully, making special note of the Rams LOW HEIGHT and STROKE.

 SAMPLE VALVE SET-UP
Sample Control Valve Set-up
TYPICAL SYSTEM IMAGE

60 TON ENERPAC SYSTEM

Consisting of Four 15 Ton 4 Inch Stroke Ram Cylinders
Low Height 7.88 Inches (Longer Rams are listed as Options on the right side table)
QTY. ITEM DESCRIPTION $ EACH $ TOTAL
4 15 Ton 4" Stroke Rams $404 $1,616
4 30 Foot Hoses $353 $1,412
8 Quick Disconnect Couplers $57 $456
1 Manifold w/4 Control Valves $614 $614
1 10,000 PSI Gauge w/Adapter $301 $301
1 Short Hose (Pump to Manifold $68 $68
1 1.7 HP 110 Volt AC PUMP $2,954 $2,897
4 Ram Bases Not Available NONE
GRAND TOTAL $7,364
System Ram Options $
For 6" Stroke (Low Height 10.59") Rams Add... $128
For 8" Stroke (Low Height 12.69") Rams Add... $412
For 10" Stroke (Low Height 14.69") Rams Add... $844
For 12" Stroke (Low Height 16.69") Rams Add... $1,404
For 14" Stroke (Low Height 18.69") Rams Add... $1,648
Prices are as of October 7, 2007 and are subject to change at anytime.

100 TON ENERPAC SYSTEM

Consisting of Four 25 Ton 4 Inch Stroke Ram Cylinders
Low Height 8.50 Inches (Add 3/8" if Base is used) (Longer Rams are listed as Options on the right side table)
QTY. ITEM DESCRIPTION $ EACH $ TOTAL
4 25 Ton Spring Return Rams $488 $1,952
4 30 Foot Hoses $353 $1,412
8 Quick Disconnect Couplers $57 $456
1 Manifold w/4 Control Valves $614 $614
1 10,000 PSI Gauge w/Adapter $301 $301
1 Short Hose (Pump to Manifold $68 $68
1 1.7 HP 110 Volt AC PUMP $3,191 $3,129
4 Ram Bases $252 $1,008
GRAND TOTAL $8,942
System Ram Options $
For 6" Stroke (Low Height 10.75") Rams Add... $268
For 8" Stroke (Low Height 12.75") Rams Add... $1,000
For 10" Stroke (Low Height 14.75") Rams Add... $1,484
For 12" Stroke (Low Height 16.75") Rams Add... $2,020
For 14" Stroke (Low Height 18.75") Rams Add... $2,184
Prices are as of October 7, 2007 and are subject to change at anytime.
If a hydraulic lifting system does not appeal to you take a look at a new technology beginning to establish a foothold in the House/Mobile Home Lifting Field -
AirBag Jacks.
INDUSTRIAL SYSTEMS PAGE

HOME EMAIL CONTENTS Phone & Fax
This page updated by Richard J. Tafilaw, February 1, 2008. Online since March 30, 1996

Consumer Phone Hours: 9:00 AM til 2:00 PM, Pacific Time, Monday - Friday,
.
OTTO SERVICE CO., 2014 Burbank Blvd., Burbank, California 91506
United States of America
Mastercard/Visa
©2007 OTTO SERVICE